-40%

Aeroflex IFR 3500A Portable Radio Communications Test Set - LOADED & CALIBRATED!

$ 6732

Availability: 100 in stock
  • Refund will be given as: Money Back
  • Installed Options: 01/10/70/100/200
  • Brand: Aeroflex/Viavi
  • All returns accepted: Returns Accepted
  • Condition: Used
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • Frequency Range: 2 MHz - 1 GHz
  • Restocking Fee: No
  • MPN: 3500A

    Description

    Powered by
    Frooition
    Shop Categories
    Amplifiers
    Analyzers
    Cable & Antenna Analyzers
    Cables
    Calibration Kits
    Calibrators
    Counters / Timers
    Detectors
    Emulators
    Error Detectors
    Logic Analyzers
    Meters
    Modules / Plug Ins
    Multimeters
    Network Analyzers
    Noise Generators
    Noise Sources
    Optical
    Optical Spectrum Analyzers
    Oscilloscopes
    Other
    Pattern Generators
    Power Meters
    Power Sensors
    Power Supplies
    Probes
    RF / Microwave
    Service Monitors / Test Sets
    Signal Analyzers
    Signal Generators
    Spectrum Analyzers
    Thermal Imagers
    VXI
    We buy, sell and rent general purpose, optical and RF test and measurement equipment. We pay top dollar for your unwanted, surplus or defective gear. Let us make you an offer on your new or used Agilent, Tektronix, Anritsu, Fluke, Rohde & Schwarz and IFR instruments.
    Aeroflex 3500A Portable Radio Communications Test Set - LOADED & MFG CALIBRATED!
    Item Description
    Aeroflex 3500A Portable Radio Communications Test Set with Options 01/10/70/100/200- MFG CALIBRATED!
    You are bidding on an Aeroflex 3500A Portable Radio Communications Test Set with Options 01 (Spectrum Analyzer), 10 (Oscilloscope), 70 (Tracking Generator), 100 (P25) and 200 (DMR) installed. It will arrive with a fresh calibration performed by the manufacturer (now Viavi).  All standard accessories shown are included
    A Radio Test Set that can be used anywhere.  Featuring full radio test set features, with up to 7 hours of battery life, the Aeroflex 3500A is ready to be used anywhere. The 3500A is perfect for testing AM and FM radio transceivers, whether on a bench, installed in a vehicle, or in some remote location. It also has the power to test the cables and antennas, making it the only hand-held radio test set that can test all the components of an installed radio system.
    Features:
    2 MHz - 1 GHz operation
    AM/FM transmitter and receiver tests
    Spectrum Analyzer with < -136 dBm noise floor
    Audio Frequency Oscilloscope
    Antenna/Cable tests
    Weight less than 8 lbs.
    5 hour battery life with continuous use
    -20 to +50 C operating temperature range
    Rugged construction (specifications for humidity, altitude, shock, and vibration, MIL RF 28800F Class II Certified)
    Capabilities Include:
    AM and FM Modulation meter
    Accurate RSSI measurement
    Measuring high power (20 watts without an external attenuator, up to 150 watts with an external attenuator)
    AF Generator and Modulator
    DCS Generator
    RF Frequency Error meter
    SINAD and Distortion measurement
    Audio Frequency Counter
    Distance To Fault (DTF) measurement
    VSWR and Return Loss measurement
    Cable Loss measurement
    Spectrum Analyzer Option:
    With the spectrum analyzer option, users of the 3500A can look at the RF signal from the radio under tested or find possible interferers at their base station or repeater site. An effective resolution bandwidth that goes down to 19 Hz, together with a low noise figure enables the 3500 to have a noise floor that easily exceeds the specification of < -136 dBm.
    Oscilloscope Option:
    The oscilloscope option allows users of the 3500A the capability to observe the audio signal from the radio being tested or the demodulated audio from the RF signal received. The 3500A oscilloscope includes markers that the user can use to help analyze the audio signal.
    Field Test 6 Software from Survey Technologies Inc:
    In addition to the features that are part of a radio test set, the 3500A will also support Survey Technologies Field Test 6 Software. Users of the 3500A series can improve and automate the acquisition, analysis and display of signal strength across a given terrain, as well as inside buildings. Field Test 6 has expanded the drive-test measurement concept to include indoor measurement and analysis for applications where GPS is not available.
    One port measurement of Distance to Fault, VSWR, Return Loss, or Cable loss:
    The 3500A Radio Test Set can measure and graphically display Distance to Fault, VSWR, return loss and cable loss. The VSWR, return loss, and cable loss are displayed on a graph that shows the respective values of these measurements versus frequency. The Distance to Fault (DTF) is displayed on a graph that shows the return loss versus distance. With these four measurements, a complete analysis can be done on the cabling and antenna of a radio system.
    Perfect for Over-the-Air Testing:
    Design for portable operation, the 3500A is ideal for performing over the air testing of installed radios. By utilizing over the air testing techniques, a radio installed in a vehicle or a remote site can be tested, without making a direct connection. A handset is included to help make voice quality measurements of the transmitter and receiver.
    Benchtop type tests allow the 3500A to go further than simple go/no go testing: With the 3500A as your test tool, you have the capability to go past simple go/no go testing. The transmitter and receiver test screens include meters to measure transmitter parameters such as power, frequency and modulation. The receiver test screen includes meters to measure receiver sensitivity (SINAD) and audio distortion. The 3500A even includes two audio generators that can be used either at baseband or to modulate the transmitter. In addition, a DCS or DTMF generator are available as a modulation source. All of these features combine to make the 3500A a complete radio test set for FM and AM radio transceivers.
    This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes w/ a 14 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.
    Insurance is included in UPS shipping charges.
    Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.
    We will accept payment for this item by company check, cashiers check and wire transfer only.
    If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction.
    Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.
    Please note that shipping and insurance costs are non-refundable.
    Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.
    Make sure that you check out
    our other auctions
    for more great deals on test and measurement equipment.
    Thank you and good luck bidding.
    Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.
    About Us
    About Us
    Payment
    Shipping
    Terms
    Returns
    About Us
    Spaulding Surplus, LLC was established in 2002 and we pride ourselves on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around. Our equipment is sourced from a variety of manufacturers including Agilent/HP, Fluke, Tektronix, Rohde & Schwarz, LeCroy, Anritsu, Advantest, Aeroflex/IFR, ILX Lightwave, JDSU, Wavetek, etc. We are also dedicated to providing fair and competitive bids for your unused test equipment and excess inventory. WHY PAY MORE FOR THE SAME EQUIPMENT?
    Payment
    Payment
    We accept payment by company check, bank transfer and Paypal (for items valued below 00 USD). Payment must be received within 5 days of close of auction. Our mailing address is below and our bank info can be forwarded upon request. Spaulding Surplus 12829 Landale Street Studio City, CA 91604.
    Shipping
    Shipping
    All instruments are professionally packed and shipped via UPS GROUND with full insurance. We typically ship within the continental US only (please no PO Boxes) unless other arrangements have been made with the buyer. International customers may provide their UPS, DHL or FedEx account for international shipments. Items will be shipped within 7 business days of payment.
    Terms
    Terms
    All items sold on Ebay come with a standard 30 day right of return warranty from the date of receipt, unless otherwise specified in the auction details. Payment in full is required prior to shipment. Buyers are required to notify us immediately if an instrument arrives damaged, and must keep all boxes and packing materials in case a UPS damage inspection is necessary. An extended warranty of 30 days is available for all direct purchases from Spaulding Surplus, LLC and established customers purchasing directly may qualify for net 30 payment terms with PO required prior to shipment.
    Returns
    Returns
    All Ebay items can be returned for a full refund within 30 days of purchase should they not function as intended, unless they are being sold AS IS with known defects. Spaulding Surplus, LLC shall not be held liable for any damages resulting from buyer/operator negligence, or the improper use of its equipment, nor does it warrant their suitability for any specific application or project. The verification of product capability is the sole responsibility of the buyer. PO's and purchases cancelled due to insufficient instrument capability, buyer's remorse or loss of order are always subject to a 20% restocking fee. A complete evaluation is required for any instrument returned under warranty, and refunds are not issued until said evaluation has been completed by an ISO 17025 accredited calibration lab.  WE KINDLY REQUEST THAT BUYERS CONTACT US FIRST SHOULD THERE BE ANY PROBLEMS WITH THE ITEM PURCHASED, RATHER THAN FILING A "NOT AS DESCRIBED" CLAIM WITH EBAY OR IMMEDIATELY LEAVING NEGATIVE FEEDBACK. WE HAVE BEEN IN BUSINESS FOR OVER 15 YEARS AND ALWAYS STRIVE FOR PERFECT FEEDBACK AND INTEND TO PROVIDE QUALITY EQUIPMENT AND EXCELLENT CUSTOMER SERVICE TO ALL OF OUR CUSTOMERS. IF YOU EVER HAVE A PROBLEM WITH A TRANSACTION WE WILL MAKE IT RIGHT!
    Helpful Links
    Add to Favorite Sellers
    Sign up to Newsletter
    View Feedback
    Contact Seller
    Visit seller's eBay Shop
    About Seller Page
    Spaulding Surplus, LLC prides itself on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around.
    More Items!
    View more great items
    Powered by
    Frooition
    Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
    This listing is currently undergoing maintenance, we apologise for any inconvenience caused.