GSM test - HP Agilent 8922M + 83220E GSM/DCS/PCS MS Multi-Band RF Test System Se

Description

HP Agilent 8922M + 83220E GSM Multi-Band RF Testing System
HP 8922B / 83220E RF GSM / DCS / PCS MS Test Kit
HP 8922M GSM Multi-Band RF Test Set with 83220E Extender
It comes with a set of instructions and everything you see in the pictures. If you don't see it, you probably won't.
Specifications are from HP and may include options / revisions not provided on this device.
Guaranteed 30 day work, spare parts and work, no load. Frequency response checked 1999.999 MHz. This unit will need to be updated to the latest factory software (3/19/04). Right now it's 2000 instead of 2004.
Information from units:
8922M Serial Number:
Firmware version: C.01.10
Serial number:
description:
Agilent 8922M is a powerful GSM RF test kit designed for high volume production. Flexible but easy to use, its extensive feature set makes it an ideal choice when speed, accuracy and repeatability are key to minimizing manufacturing costs. When used in conjunction with the Agilent 83220A / E, the Agilent 8922M frequency range is extended to cover the DCS1800 and PCS1900 bands. Agilent 8922P, based on Agilent 8922M and Agilent 83220E, enhances the Agilent 8922M by adding dual band capability.
features:
Emulates the GSM base station
Easy to use; one press of the power on button
Fast, accurate and repeatable measurements
Compatibility with GSM Phase II (including fast pulse BER measurements and enhanced Full Speech Speech mode)
High Speed ​​Circuit Switched Data
E-GSM and dual band option
Electronic attenuators for increased reliability
Tool kit of instruments including spectrum and audio analyzers
Full control over GPIB
Agilent 83212D software provides full automatic testing of a GSM mobile phone
More flexible and 25% faster than the Agilent 8922S
The first choice for GSM mobile service and repair:
Troubleshoot and find faults fast with the Agilent Technologies 8922S GSM MS service test set. Use it to reduce false failures with a test set that combines versatility with ease-of-use.
Serving the needs of the GSM mobile manufacturer:
Maximize production throughput and minimize the cost per test with the 8922M GSM MS test set. It offers the highest speed of test in its class while guaranteeing accurate and repeatable measurements.
Expand to DCS1800 or PCS1900:
Add the 83220A/E test set to test DCS1800 and PCS1900 mobiles. (this is included)
GSM functionality Specifications:
Bit/frame error rate measurements: Class Ia, Ib, and Class II bits in both raw and residual form.
MS power output level control: 0 to 15 with RF analyzer auto adjust.
Broadcast channel capability: BCCH + CCCH or  BCCH + CCCH + SDCCH/4.
Control channels (SDCCH, FACCH, SACCH): BCCH + CCCH, BCCH + CCCH + SDCCH/4, SDCCH/8 (nonhopped), SACCH/FACCH.
Call control capabilities: BS originated cell (FS/EFS), MS originated call (FS/EFS), MS camp-on, BS call disconnect, MS call disconnect.
Traffic channels: TCH (FS/EFS)–HSCSD
Timing: Auto, manual, uplink-downlink and offset measurement.
Hopping: Two independent, user definable MA tables with offsets.
Speech encoding/decoding: Full rate speech.
Speech echo mode: User selectable delay 0 to 5 seconds.
Measurement coordination: Flexible control of burst type, ARFCN and timeslot.
SACCH MEAS result: RXLEV, RXQUAL and timing advance.
Agilent 8922M Test Set:
Measurement Speed: 10 to 20% increase in throughput
Multi-burst measurement capability: Yes
GSM phase II power levels: Yes
E-GSM frequency bands: Yes
Electronic attenuator: Yes
SMS cell broadcast: Yes
Peak carrier power meter range: -5 to +41 dBm
RF generator power level range: -14 to -127 dBm
Burst-by-burst BER measurement: Yes
Screen freeze facility: Yes
Flash firmware upgrades by GPIB: Yes
IMSI attach/detach function: Yes
Transmitter tester:
Transmitter measurements such as power versus time, modulation phase and frequency error, and burst timing are made using a fast DSP analyzer. There’s also an accurate peak power meter to perform the GSM average Tx power measurement, taking sam-ples only during the active part of the burst.
Receiver tester:
Receiver testing is done using an accurate 0.3 GMSK source. The wide dynamic range allows for low-level sensitivity measurements and high power tests to check for receiver saturation. Mobile receiver sensitivity is measured by making bit-error-rate measurements on Class Ia, Ib and II bits in either raw or residual form.
Spectrum analyzer:
The optional spectrum analyzer completes the array of GSM measurements which can be made. It provides high dynamic range pulse on/off ratio measurements and output RF spectrum tests. The spectrum analyzer also makes an excellent diagnostic tool for tracing signals and finding problems.
Toolkit (not sure if this is included or not):
The full-featured tool-kit includes a power meter, CW RF synthesizer, audio synthesizer, frequency vounter, DVM, audio analyzer, oscilloscope and DSP Analyzer. These tools can be configured to measure just about any signal a GSM phone can produce, whether on a call or in test-mode.
Base station emulator:
The GSM base station emulator creates a test network to which the mobile can camp and make calls. The emulator is capable of causing a ‘simple camp’ so that receiver and transmitter functions can be verified separately. A speech coder is present to allow functional voice testing. A variety of basic call processing features test the mobile as if it were in a real network. These features include hopped traffic channels, call origination and termination (both mobile and base station), hand-overs, channel assignments, Tx power control commands and a choice of control channel configurations.
Automatic software (not sure if this is included):
The optional automatic test software is easy to use, fast and simple to configure. With the flexibility to allow test sequences to be created and saved in minutes, automatic test software personalizes the test set for each part of the incoming inspection or repair process.
Agilent 8922M Tests:
Associated      GSM Specifications
11.10 Tests
Transceiver      frequency bands II.2.1.1
Transceiver RF      channels and numbering II.2.1.2
Transceiver      frequency hopping II.2.1.3
Transceiver      spurious emissions¹ II.2.2
Tx peak      transmitted power II.3.3
Tx RF spectrum      due to switching² II.3.4
Tx RF spectrum      due to modulation² II.3.4
Tx amplitude      envelope (top 30 dB, and -70 dBc point) II.3.3
Tx phase error      and frequency error II.3.1
Rx sensitivity II.4.2
Rx usable      input level range II.4.3
Rx co-channel      rejection³ II.4.4
Rx adjacent      channel rejection (same frequency/different timeslot) (different      frequency/same timeslot)³ II.4.5
Rx      intermodulation rejection³ II.4.6
Rx blocking      and spurious response II.4.7
Timebase      tuning range Production test
1 The 8922S/M have limited capability for this measurement (< 1 GHz, and limited resolution bandwidth and spans).
2 The 8922S/M test set use a 3 pole resolution bandwidth filter to make these measurements.
3 8922M test set only; an additional RF source, such as the 8657 Option 022 0.3 GMSK signal generator, is required to make this measurement.
4 An additional CW RF source (frequency range of 100 kHz to 12.75 GHz, no modulation needed) is required to make this measurement.
THIS HP 8922M MS TEST SET GSM/DCS/PCS  USES AN HP3220E OPTION 010 UNIT FOR ITS RF INTERFACE.  BOTH UNITS ARE INCLUDED IN THIS AUCTION AND PICTURES OF BOTH ARE SEEN, BOTH FRONT AND REAR VIEWS PLUS "STACKED".
THE UNITS ARE APPROXIMATELY 24" X 17 " BY 6" AND 7"
THEY ARE USED TO CALIBRATE CELL PHONES AND HAVE A RANGE FROM 10 - 1000 MH
THEY WILL BE SHIPPED IN TWO PACKAGES, WITH THE COMBINED SHIPPING BEING 230.  NO INTERNATIONAL SHIPPING